Mechanical · Steam & Thermal Fluid
Steam & Thermal Fluid Piping (TSSA)
Industrial steam fitting and thermal fluid piping for process plants, installed, supported and pressure-tested to the B31.1 power-piping code and registered with the TSSA.
- Steamfitters on Staff
- Fully Insured
Trusted by Manufacturers Across Ontario
Steam fitting and thermal fluid, installed and tested to code. Process steam, thermal fluid and condensate systems for industrial and commercial plants, engineered for expansion, supported properly and pressure-tested to the power-piping code. Installed across the GTA and Southern Ontario.
70+
Years of Industrial Work
100+
Tradespeople and Crew
20K
Projects Completed
200+
Trucks and Industrial Assets
The Problem
A Steam Failure Is a Safety and Production Problem
Steam and thermal fluid run hot and under pressure. A failed line is both a safety hazard and a production issue that stalls the process. It stalls the process. We install steam systems to accommodate expansion, remove condensate and run efficiently.
What We Do
Steam Fitting, Thermal Fluid and Condensate
Steam fitting, thermal fluid systems, condensate return and steam traps for process plants, installed and tested to code.
Process Steam Distribution
Process steam mains and branches, sloped and routed for clean, dry industrial steam.
Thermal Fluid Piping
Thermal fluid piping for high-temperature process heat where steam is not the right fit.
Condensate & Feedwater
Condensate return, feedwater and deaerator piping, installed to keep the system running efficiently.
Steam Traps & Accessories
Steam traps, drip legs, separators, regulator stations and safety valves.
Expansion, Supports & Anchoring
Expansion loops, guides and anchors engineered so the system functions safely.
Pressure Testing & Certification
Every line pressure-tested, documented and certified to the power-piping code before it is commissioned.
Built to Code
Tested to the B31.1 Power-Piping Code
Steam and thermal fluid are pressure systems, governed by the TSSA and built to the B31.1 power-piping code. We are TSSA registered. Licensed steamfitters and qualified welders install the system to design specifications and test to TSSA standards before commissioning. High-pressure steam systems are installed by our licensed steamfitters and inspected by the TSSA. Low-pressure steam systems are installed to industry best practices.
Food & Beverage
The Food and Beverage Plants in Ontario Already Know Us
We have extensive experience servicing Tier-1 food and beverage process plants. When you call, the crew that shows up has already run the systems your plant depends on.
- Extensive Tier-1 Food and Beverage ExperienceTier-1 food and beverage process facilities across the GTA are the core of our work, so your systems and standards are familiar ground.
- Stainless, Welded for CleanabilityStainless process utility piping, welded and finished so it cleans down the way a food plant needs.
- We Know Dairy and Food Process SystemsSteam distribution, glycol and chilled-water loops, deaerators, hot-water skids and process gas, the systems that actually run a food or dairy plant.
- Built Around Your ProductionTie-ins and shutdowns planned around your run schedule and washdown windows, so the line keeps moving.
- One Partner for the Whole PlantThe same house that pipes your process also moves the machine, aligns the line and services the dock door.
All Industries We Serve
You Should Not Have to Explain Your Plant
The crew we send has already run piping, boilers and process systems in plants like yours.
Safety
Everything Considered. Everyone Ready.
The best mechanical work passes inspection the first time and never leaks under pressure. Every gas, steam and high-pressure job is planned, isolated and tested before your plant relies on it.
- Signed Off Before We StartA job hazard assessment and a toolbox talk before anyone opens a live line or fires a boiler.
- Locked Out and IsolatedLockout, tagout and line isolation coordinated with your plant before any tie-in or changeover.
- Licensed for the WorkTSSA-registered, with licensed people on every gas, steam and high-pressure job and licensed trades throughout.
- Welded and Tested to CodeInspected welds and pressure tests before a system goes back into service, documented for your records.
- Hot Work ControlledHot-work permits, fire watch and ventilation on welding and cutting inside your facility.
- Everyone Goes HomeWSIB in good standing, full insurance, and a safety record we hand to your EHS team.
How It Works
From Your First Call to a System That Runs
We can take a project design-build, managing scope, value engineering, procurement, installation and start-up as one package, so you have one partner from the first call to the last sign-off.
Call or Tender Package
It starts with your call or a tender package. We visit the site and confirm the scope with you before anything is priced.
Quote and Award
You get a fixed, scoped quote, a price we stand behind with no surprise change orders. Once it is awarded, we plan the work.
Value Engineering
We value-engineer the design with you to maximize value, improve constructability and protect the schedule before anything is ordered.
Procurement
We procure the equipment and the materials, so specification and lead times are managed as one package.
Install and Test
We run and support the lines, tie them in, then pressure-test the system to code before it is commissioned.
Clean Up and Support
We clean up the site, hand over the documentation, and stay on as your mechanical partner after start-up.
Why ReadyForce
Why Plants Call ReadyForce for Steam
Steam is a regulated pressure system, so we treat it like one
TSSA-registered, built to the B31.1 power-piping code, with the expansion and supports engineered, not guessed.
One Partner for the Whole Steam Plant
The same house that runs the steam also installs the boiler, the gas, the condensate and the process utility piping around it.
Engineered for Expansion
Expansion loops, guides and anchors engineered so the system moves safely and the joints do not carry the load.
Built Around Your Production
Tie-ins and shutdowns planned around your run schedule, so steam work does not stop the plant.
Food, Beverage and Dairy Plants
We run process steam for food, beverage and dairy plants, so your systems are familiar ground.
Design and Build
We can take a project design-build, with scope, value engineering, procurement, installation and start-up managed as one accountable package.
What Partners Say
"Every detail was executed with precision, professionalism, and genuine passion."
"Extraordinarily well organized and efficient. Your team made it seem almost effortless."
"Your crew did an outstanding job. We couldn't have expected a better outcome."
"We were all impressed with how everything went quick and smoothly."
"The job went very smoothly and was seamless from start to finish."
"The crew did an excellent job. Super nice and very professional."
200+
Trucks and assets
Ready to roll.
Company Overview
Take Us to Your Team
A one-page overview: fleet, capabilities, certifications and track record. Built to forward to whoever signs off the work.
Ready for a Mechanical Project?
One ReadyForce relationship, one number to call.
New Systems
Install & Start-Up
New boiler, piping or process system, scoped and installed to code, ready to run.
Plant & Operations
Service, Repairs & Retrofits
Breakdown repairs, service calls, line changes and tie-ins that keep the plant running, scoped before we price it.
Procurement
Tenders & RFQs
Approved-vendor and RFQ-ready, with insurance, WSIB and safety documentation on request. Send us your drawings and specs.
Something Down?
Emergency Response
Gas, steam or a line down right now? Call us and we will get the right licensed crew moving.
Common Questions
Steam and Thermal Fluid, Answered
Always Ready
Steam That Stays Tight, Hot and Safe
Tell us the load and the plant. We route the steam, engineer the expansion and pressure-test it to code, all planned around your shutdown.